Recalling equalizer curves 13, Audio adjustments, Adjusting the time alignment – Pioneer DEQ-P7000 User Manual
Page 13: Using the equalizer
Audio Adjustments
En
13
Adjusting the time alignment
By adjusting the distance between each
speaker and a selected listening position, you
can insert delay times into the speaker output to
obtain a correct sound image and overall level
balance. Although this is automatically
achieved when you set the listening position,
the time alignment feature provides a fine
adjustment.
1 Press AUDIO and hold until SP Set
appears in the display, then press AUDIO to
select Time A.
After SP Set is displayed, press AUDIO until
Time A appears in the display.
• You cannot select Time A when neither F/L
nor F/R is selected in Posi.
2 Press
2 or 3 to select the speaker to be
adjusted.
Each press of
2 or 3 selects the speaker in the
following order:
Front speaker left—Center speaker—Front
speaker right—Rear speaker right—Rear
speaker left—Subwoofer
• You cannot select speakers whose size is set
OFF.
3 Press
5 or ∞ to adjust the distance
between the selected speaker and the listen-
ing position.
Each press of
5 or ∞ increases or decreases
the distance.
• 500.0cm — 0.0cm is displayed as the dis-
tance is increased or decreased.
4 Press BAND/ESC to return to the playback
display.
Using the equalizer
The parametric equalizer lets you adjust the
equalization to match car interior acoustic char-
acteristics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
Display
Equalizer curve
SUPER BASS
Super bass
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
FLAT
Flat
CUSTOM1, 2
Custom1, 2
• CUSTOM1 and CUSTOM2 are adjusted
equalizer curves that you can create for your-
self.
• When FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between FLAT and a set
equalizer curve.
Press EQ to select the equalizer.
Press EQ repeatedly to switch between the
following equalizer.
POWERFUL—NATURAL—VOCAL—
FLAT—CUSTOM1—CUSTOM2—SUPER
BASS
English
Español
Deutsch
F
rançais
Italiano
Nederlands
02
Section