Pioneer DEQ-P7000 - Manual (Page 17)

Additional Information
En 17
English
Español
Deutsch
F
rançais
Italiano
Nederlands
04
Section
Audio/DSP
Symptom Cause Remedy
Speakers are not available to be
adjusted.
Time alignment is not available.
The subwoofer is not available to
switch its phase.
Bass content is not heard.
Occasionally no sounds are outputted
when Dolby Pro Logic is switched on.
Occasionally no sounds are heard over
speakers other than the center one.
Switching dynamic range control on
has no effects.
Their size settings is at OFF.
Listening position is not set
correctly.
Their size settings is at OFF.
The subwoofer is set to OFF.
The subwoofer is set to OFF
and yet other speakers are set
to OFF or SMALL in size.
The center speaker setting is at
SMALL or LARGE whereas
no center speaker is installed.
Dolby Pro Logic is switched on.
The currently reproduced
sound is not Dolby Digital
coded.
Make the correct size settings. (See page
10.)
Set listening position correctly. (See
page 7.)
Make the correct size settings. (See page
10.)
Set the subwoofer to ON. (See page 10.)
Make the correct settings. (If no sub-
woofer is installed, the front or rear
speaker needs to be set to LARGE.) (See
page 10.)
Change the center speaker size setting to
OFF. (If the audio source is mono and
Dolby Pro Logic is switched on, sound is
heard over the center speaker only.) (See
page 10.)
Set Dolby Pro Logic to OFF. (If the audio
source is mono and Dolby Pro Logic is
switched on, sound is heard over the
center speaker only.) (See page 9.)
The feature is only effective on Dolby
Digital sounds. (See page 9.)
DVD player setting
Symptom Cause Remedy
No sounds come from the DVD player
only. The optical cable has become
detached.
The DVD player is not properly
set for output.
Connect the cable correctly.
Make the correct output setting. (See the
manual for the DVD player.)