Pioneer AVH-X7500BT - Manual (Page 37)

37
E
N
GL
IS
H
Audio adjustments
Using fader/balance adjustment
Fader/Balance displays when Rear Speaker is set to Full on the System Menu.
You can change the fader/balance setting to provide an ideal listening environment for
all of the occupied seats.
1. Press the home button to switch to the home display.
2. Touch the audio function key to open the audio menu.
3. Touch Fader/Balance on the audio function menu.
4. Touch or to adjust the front/rear speaker balance.
Range: F 15 L/R 0 to R 15 L/R 0
• Select F/R 0 L/R 0 when only using two speakers.
5. Touch or to adjust the left/right speaker balance.
Range: F/R 0 L 15 to F/R 0 R 15
Note
• You can also set the fader/balance by dragging the dot on the displayed table.
Using balance adjustment
Balance displays when Rear Speaker is set to Subwoofer on the System Menu. This
setting will allow you to adjust the balance between right/left sound output.
1. Press the home button to switch to the home display.
2. Touch the audio function key to open the audio menu.
3. Touch Balance on the audio function menu.
4. Touch or to adjust the left/right speaker balance.
Range: L 15 to R 15
Note
• You can also set the balance by dragging the dot on the displayed table.
Using the equalizer
You can adjust the equalization to match the car’s interior acoustic characteristics as
desired.
Recalling equalizer curves
There are seven stored equalizer curves which you can easily recall at any time. Here
is a list of the equalizer curves.
• The equalizer curves for Custom1 and Custom2 can be adjusted.
• You cannot select Custom1 and Custom2 when using the auto-equalizer.
• When Flat, no changes are made to the sound. You can check the effects of the
equalizer curves by switching alternatively between Flat and another equalizer
curve.
1. Press the home button to switch to the home display.
2. Touch the audio function key to open the audio menu.
3. Touch Graphic EQ on the audio function menu.
• You cannot select or adjust the equalizer curves of Custom1 and Custom2 when
using the auto-equalizer.
4. Touch the desired setting.
S.Bass – Powerful – Natural – Vocal – Flat – Custom1 – Custom2
Adjusting the 8-band graphic equalizer
You can adjust the level of each band for the equalizer curves.
• A separate Custom1 curve can be created for each source. If you make
adjustments when a curve other than Custom2 is selected, the equalizer curve
settings will be stored in Custom1.
• A Custom2 curve that is common for all sources can be created. If you make
adjustments when the Custom2 curve is selected, the Custom2 curve will be
updated.
Display Equalizer curve
S.Bass Super bass
Powerful Powerful
Natural Natural
Vocal Vocal
Flat Flat
Custom1 Custom 1
Custom2 Custom 2
13-MAN-AVH7500-GB.fm Page 37 Thursday, February 28, 2013 10:20 AM