Pioneer CT-L11 - Manual (Page 11)

11
En
3 Using the Tape Deck
Recording using the timer
You can set up the system to make a
recording from the built-in tuner or
from a component connected to the
VIDEO (
AUX ) input jacks.
1 Select the source you want to
record.
Press
TUNER FM / AM ( AM or FM ) if
you’re recording from the built-in
tuner, or
VIDEO ( AUX ) if you’re
recording from an external component.
2Prepare the source.
If you’re recording from the radio, tune
in the station.
3 Press CLOCK/TIMER
(TIMER) and select TIMER
REC.
TIMER REC
• DVD model: Use the
2 and 3
buttons to change the currently
displayed option; press
ENTER to
select it.
• CD model: Use the
4 and ¢
buttons to change the currently
displayed option; press
SET to select
it.
4 Select TIMER EDIT.
TIMER EDIT
5 Set the switch on time.
ON 1O :OO am
• DVD model: Use the
2 and 3
buttons to set the hour then press
ENTER . Set the minute in the same
way, pressing ENTER to finish.
• CD model: Use the
4 and ¢
buttons to set the hour then press
SET . Set the minute in the same
way, pressing SET to finish.
TUNER
V1/V2/V3
VIDEO
FM/AM
ENTER
3 2
CLOCK/
TIMER
SOUND
TIMER
SET MENU
DISP
CANCEL
1
7
¡
4 ¢
CD
MD TAPE
AM FM
AUX
CHARACTER
DIRECT PLAY 3
6 Set the switch off time.
OFF 11 :OO am
Set in the same way as the switch on
time.
7 Select the tape or MD
recorder.
•
MD REC
•
TAPE REC
8 Check the settings you just
made.
The display shows the timer settings:
ON 9:3O am
OFF 1O:3O am
FM 87.5OMHz
TAPE REC
CHECK END
TIMER CHECK
9 Switch the system into
standby.
The timer will not work if the system is
left on!
The standby light on the front panel
lights green to indicate that the timer
has been set.