Pioneer CT-L11 - Manual (Page 10)

10
En
Using the Tape Deck 3
Recording other sources
Use this when recording from the built-in tuner, or from
a component connected to the auxiliary analog inputs.
1 Follow steps 1–4 of Automatically record-
ing CDs and MDs on page 9.
•
Load a cassette
• Set the record direction
• Set the reverse mode
• Switch Dolby NR on/off.
2Select the source you want to record.
For example, if you want to record from the tuner, press
FM / AM , and tune into a station.
If you are recording from another component, set it up
ready for playback.
3 Press
¶8 (front panel only).
The tape deck goes into record-pause.
4 Press TAPE to begin recording.
If you’re recording from a component that requires you
to start playback (a turntable or another cassette deck,
for example), start playback here.
• To pause recording, press
¶8. To resume, press
23.
5 When you want to finish the recording,
press
7.
Changing the system information
• Press SYSTEM DISP (DISP) to change the
information shown in the display.
TAPE OOO4
4:12 am
Tape counter
Time