Pioneer AVH-X2600BT - Manual (Page 67)

4 Touch Rear Speaker on the system
menu to switch the subwoofer output or
full-range speaker.
# When no subwoofer is connected to the rear
output, select
Full (full-range speaker).
# When a subwoofer is connected to the rear
output, select
Subwoofer (subwoofer).
Notes
! Even if you change this setting, there will be
no output unless you turn the subwoofer out-
put on (refer to Using subwoofer output on
page 56).
! Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Using the keyboard
Keyboard is available only in AppRadio
Mode.
Refer to Setting the Keyboard on page 37.
Setting the ever scroll
When ever scroll is set to On, recorded text in-
formation scrolls continuously in the display.
Set to
Off if you prefer the information to
scroll just once.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
3 Touch Ever Scroll on the system menu
to turn ever scroll on or off.
Setting the Bluetooth audio
(Function of AVH-X5600BT/AVH-X3600DAB/
AVH-X2600BT)
You need to activate the
Bluetooth Audio
source in order to use a Bluetooth audio
player.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
3 Touch Bluetooth Audio on the system
menu to turn Bluetooth audio on or off.
Clearing Bluetooth memory
Important
Never turn the unit off while the Bluetooth mem-
ory is being cleared.
1 Turn the source off.
Refer to Turning the source ON/OFF on page
10.
2 Press the home button to switch to the
home display.
3 Touch the system key to open the sys-
tem menu.
4 Touch Bluetooth Memory Clear on the
system menu.
5 Touch Clear.
After selecting a desired item, a confirmation
display appears. Touch
OK to delete the mem-
ory.
# If you do not want to clear the memory, touch
Cancel.
Updating Bluetooth software
This function is used to update this unit with
the latest Bluetooth software. For about
Bluetooth software and updating, refer to our
website.
Important
Never turn the unit off and never disconnect the
phone while the software is being updated.
En
67
Section
19
System
settings
System settings