Pioneer AVH-X2600BT - Manual (Page 36)

AppRadio Mode operation
This system can switch to the AppRadio
Mode, which you can display and operate the
application for iPhone on the screen.
In
AppRadio Mode, you can operate applica-
tions with finger gestures such as tapping,
dragging, scrolling or flicking on the screen of
the system.
Install the AppRadio app on your iPhone.
WARNING
Certain uses of an iPhone or smartphone
may not be legal while driving in your juris-
diction, so you must be aware of and obey
any such restrictions.
If in doubt as to a particular function, only
perform it while the car is parked.
No feature should be used unless it is safe to
do so under the driving conditions you are
experiencing.
CAUTION
While driving, you cannot enter text on your iPod.
! Pioneer is not liable for any issues that may
arise from incorrect or flawed app-based
content.
! The content and functionality of the sup-
ported applications are the responsibility of
the App providers.
! In AppRadio Mode, functionality through
the product is limited while driving, with
available functions determined by the App
providers.
! Availability of AppRadio Mode functional-
ity is determined by the App provider, and
not determined by Pioneer.
! AppRadio Mode allows access to applica-
tions other than those listed (subject to lim-
itations while driving), but the extent to
which content can be used is determined
by the App providers.
Important
! When listening to music and sounds from ap-
plication simultaneously, see the following
section. Refer to Operating the sound mixer on
page 77.
Notes
! Applications operable by switching this sys-
tem to AppRadio Mode are only those avail-
able for AppRadio Mode.
! Please check applications supported
AppRadio Mode at
http://www.pioneer.eu/AppRadioMode
iPhone compatibility
AppRadio Mode is compatible with the fol-
lowing iPod models.
! iPod touch 5th generation (only with AVH-
X5600BT/AVH-X3600DAB/AVH-X2600BT)
! iPod touch 4th generation
! iPhone 5 (only with AVH-X5600BT/AVH-
X3600DAB/AVH-X2600BT)
! iPhone 4S
! iPhone 4
Starting procedure
1 Install the AppRadio app on your
iPhone.
2 Set Device connection.
Device connection can be set when all of the
following conditions are met.
— The iPhone is not connected.
— No Bluetooth connection.
— The source is turned off.
1 Turn the source off.
Refer to Source off
key on page 10.
2 Press the home button to switch to the
home display.
3 Touch the system key to open the system
menu.
4 Touch Device connection on the system
menu.
5 Touch the desired setting.
En
36
Section
10 AppRadio Mode