Pioneer P1-S - Manual (Page 7)

Controls
7
En
Buttons available for the stereo receiver control
mode
The following functions are available only when the remote
control is in the stereo receiver control mode.
Important
• Press the CONTROL RCV button before pressing the
following buttons.
1 CLOCK
Press to set the clock (page 13).
2
AUTO TUNE
Press to start the DAB auto scan (XC-P01DAB only)
(page 23).
3
RDS function buttons
PTY − Use to search for RDS program types (page 22).
RDS DISP − Press to display the different types of RDS
information available (page 22).
4 TOP MENU
Press to display the DAB setting menu (XC-P01DAB only)
(page 24).
5
///
Use to select system setting and switch modes.
TUNE / − Use to find radio frequencies (pages 21, 23).
PRESET / − Use to select preset radio stations
(pages 21, 22).
6 ENTER
Press to confirm actions.
7 SETUP
Press to access the setup menu (pages 14, 27).
8 Numeric buttons
Use to enter the number (page 21).
9 Tuner control buttons
BAND − XC-P01:Switches between FM ST (stereo) and FM
MONO radio bands (pages 21, 22).
XC-P01DAB: Switches between FM ST (stereo) and FM
MONO, and DAB radio bands (pages 21, 22, 23).
TUNER EDIT − Use to memorize/name stations for recall
(page 21).
10 TIMER
Press to set the wake-up timer or check the current setting
(page 25).
11 DIMMER
Press to adjust the brightness of the display (page 13).
12 DISPLAY
Press to display information of the current mode (pages 22, 24).
13 RETURN
Press to exit the current menu screen.
14 CLEAR
Press to clear the specified settings.
2
3
1
4
5
7
6
8
6
11
9
10
12
13
14