Pioneer P1-S - Manual (Page 24)

Listening to the DAB (XC-P01DAB only)
24
En
Displaying DAB radio information
1 Select DAB.
See Selecting DAB on page 23 for more on this.
2 Press the CONTROL RCV button on the remote control.
3 Press the RDS DISP or DISPLAY button repeatedly to
display information about the selected DAB station.
Program Type
Displays the type of program.
SNR (Signal Noise Rate)
Noise may be generated and reception quality may become
poor according to Signal Noise Rate. If reception quality is
poor, move the antenna in different directions to find a
position where the good rate is displayed.
DLS (Dynamic Label Segment)
When tuned to a station which is broadcasting DLS text data,
the text will scroll across the display.
Audio Mode
Displays the audio mode (stereo or mono).
Frequency
Displays the frequency of the current multiplex.
Multiplex Name
Displays the name of the current multiplex.
Bitrate
Displays the bit rate.
DAB setup
1 Press the CONTROL RCV button on the remote control.
2 Press the TOP MENU button.
3 Press the / button to select the item to be set, then
press the ENTER button.
The following settings are available for DAB.
DRC
The DRC (Dynamic Range Control) function lets you change
the dynamic range of the received sound depending on the
content of the broadcast so that the sound is easier to hear
even when the volume is low.
Press the
/ button to select the following options, and
then press the ENTER button.
DRC:Off
: DRC is switched off.
Any DRC level broadcast will be ignored. This is the default
setting.
DRC:On
: Applies DRC level as sent with the broadcast.
Component Reset
Deletes all the stations.
While “Reset: Yes?” appears, press the ENTER button.
BBC
News
SNR:100
BBC
Scroll
All the late
BBC
BBC
DAB Stereo
FREQ:239.200MHz
BBC
BBC Station
BBC
BITRATE:192kbps
BBC