Pioneer SBX-N700 User Manual
Page 50
Advanced settings
50
En
A
5
Adjusting the video
1. Select and set [Display Setting]
d
[Video Adjust]
d [Custom].
Use /b to select, then press ENTER.
2. Select the item and change the setting.
Use /b to select the item, then use c/d
to change the setting. Once the setting is
completed, press
RETURN to close the
settings screen.
Item
Description
Brightness
Select this to adjust the TV screen’s
brightness.
Saturation
Select this to adjust the TV screen’s
saturation.
Hue
Select this to adjust the color (green
and red) balance of the TV screen.
Contrast
Select this to adjust the TV screen’s
contrast.
Sharpness
Choose the level of sharpness.
CTI (Color
Transient
Improvement)
Provides images with clearer color
contours.
Adjust speaker settings
Set the distances from the listening position to
the speakers.
1. Select and set [Audio Output]
d
[Speaker Setup]
d [Next Screen].
2. Use /b to select the speaker you want
to set and press ENTER.
3. Use cursor c/d to adjust the setting,
then press ENTER.
Setting the IP address
1. Select and set [Network]
d [IP Address
Setting]
d [Next Screen].
Use /b to select, then press ENTER.
2. Set IP address.
Use /b/c/d to set the IP address of the
unit or DNS server, then press ENTER.
y Auto Set IP Address
On
– The unit’s IP address is obtained
automatically. Select this when using
a broadband router or broadband
modem that has a DHCP (Dynamic Host
Configuration Protocol) server function.
This unit’s IP address will automatically
be allocated from the DHCP server.
Off
– The unit’s IP address must be
set manually. When configuring the
[IP Address], [Subnet Mask], [Default
Gateway], and [DNS] settings, press
ENTER
to launch the software keyboard,
use the /b/c/d to select a character
or item, and press ENTER to input the
selection. Select [OK] and press ENTER to
apply all of the settings.
Note
y
For information on the DHCP server function,
refer to the operating instructions for the
network device.
y
You may need to contact your Internet service
provider or network administrator when
inputting the IP address manually.
72-MCS838-EU0B2_En.indd 50
2013/09/05 11:57:02