Pioneer XW-NAV1-K - Manual (Page 6)

Before you start 01
6
En
Chapter 1:
Before you start
What’s in the box
Please confirm that the following accessories
are in the box when you open it.
• Remote Control
• Audio/Video cable
• Power cord
• FM wire antenna
• AA batteries (R6) x 2
• Warranty card
• Operating instructions (this document)
Loading the batteries in the
remote control
1 Slide the rear lid in the direction.
Slide in the direction of the arrow ( ).
2 Open the rear lid.
3 Insert the batteries as shown on the
diagram below.
4 Close the rear lid.
Caution
• Do not use any batteries other than the
ones specified. Also, do not use a new
battery together with an old one.
• When loading the batteries into the remote
control, set them in the proper direction, as
indicated by the polarity marks ( and ).
• Do not heat batteries, disassemble them,
or throw them into flames or water.
• Batteries may have different voltages, even
if they are the same size and shape. Do not
use different types of batteries together.
• To prevent leakage of battery fluid, remove
the batteries if you do not plan to use the
remote control for a long period of time (1
month or more). If the fluid should leak,
wipe it carefully off the inside of the case,
1
2
XW-NAV1_SYXJ.book 6 ページ ２０１０年４月２０日 火曜日 午前１１時４分