Pioneer XW-NAV1-K - Manual (Page 18)

Disc playback 05
18
En
Chapter 5:
Disc playback
Playing discs or files
Note
• By using the number buttons (0 to 9), you
can specify and play the title, chapter, track
or file you want to view/ listen to.
• When playing a DVD-Video or DivX discs,
turn the TV’s power on and switch the TV’s
input before starting.
• This unit’s screen display language can be
changed (OSD Language on page 27).
1 Press  STANDBY/ON to turn the power
on.
The selected input is displayed on the front
panel display.
2 Press FUNCTION to select the DVD/CD
input.
Please wait until the indicator changes from
flashing ‘ ’ to ‘ ’.
When a disc has already been slotted in the
disc slot, press  EJECT to eject the disc.
3 Slot a disc.
Playback will begin automatically.
• Hold the disc as shown in the illustration,
insert it in the center of the disc slot, and
press in gently from above.
• The disc will then be automatically drawn
into the slot.
Note
• If the disc does not load smoothly, do not
attempt to force it. Remove it from the slot
and try inserting it again. Attempting to
force a disc causes damage or
malfunction.
• Do not touch the recording surface of the
disc, since the disc may not play properly if
it has fingerprints or other soiling.
• Adapters for 8 cm CDs cannot be used
when you play a 8 cm CD/DVD.
Eject a disc from this unit
• Press  EJECT.
Example of display on the front
panel display
When the power is turned on (ON)
When the power is turned off (OFF)
When the disc is being loaded (LOAD)
Slot a disc with
the label side
facing front.
XW-NAV1_SYXJ.book 18 ページ ２０１０年４月２０日 火曜日 午前１１時４分