Buffalo Technology WHR-HP-G54 - Manual (Page 7)

7
Step 5 - Confi gure the AirStation Router
Step 4 - Access the AirStation Router Confi guration Pages
Launch your Web browser, type 192.168.11.1 or 192.168.11.100 if in bridge mode,
and click Go. Of course, if you’ve changed your AirStation’s LAN IP address, enter
the new LAN IP address instead.
If at any time you wish to restore settings to factory defaults, press the INIT button
on the bottom of the AirStation router for 15 seconds. Do not let go of the INIT
button until the red DIAG lights up or fl ashes. The restore process can take up to
two minutes.
This dialog will ask for your User name
and password.
Enter “root” as the User name. root root
Leave the password fi eld blank.
Click OK . OK OK