Buffalo Technology WHR-HP-G54 User Manual

Page 11

Additional Information:

AOSS (AirStation One-Touch Secure System)

The router supports Buffalo’s AOSS system for connecting AOSS compatible

wireless clients to the router. For information about AOSS, please refer to the

AOSS Supplement which is included in the router package contents.

IP Addressing

To verify your IP settings for static or automatic addressing, click Start, select

Settings (if present) and click

Settings

Control Panel

. Within Control Panel, double-click

Network or Network Connections. You can then right-click on any of your wired or

wireless connections and select Properties. Within the properties, you can view the

properties of your TCP/IP protocol.

Generally, you will want to be sure that Obtain an IP address automatically

is selected to allow easier connections. To manually renew IP addressing

conﬁ gurations for your connection, follow these steps:

• Click Start and

Start

Run. A dialog box will appear where you can type cmd into

cmd

the ﬁ eld provided and click OK.

• An MS-DOS prompt will launch. Enter IPCONFIG /RELEASE and press the

IPCONFIG /RELEASE

Enter key on the keyboard to release your current IP conﬁ guration. Next,

Enter

enter IPCONFIG /RENEW and press the

IPCONFIG /RENEW

Enter key to seek new settings from

Enter

a DHCP server. (This may take a few moments).

• Type IPCONFIG /ALL. This will display all the IP conﬁ gurations for your wired

or wireless connection.

• The Default Gateway address listed in the results is usually the IP address of

the AirStation. If no IP addresses are listed or your wireless adapter displays

a 169.254.XXX.XXX address, retrace the setup steps to verify correct

169.254.XXX.XXX

installation.

• Type EXIT to close out the DOS window.

EXIT