BT DIVERSE X10 - Manual (Page 15)

Make an external call
1. Press , listen for the dial tone, then dial the number.
The display shows the icon and External Call .
Preparatory dialling
1. Enter the number first. If you make a mistake, press Clear
to delete.
2. Press to dial.
End a call
1. Press .
Receiving calls
The phone will ring and the icon will flash in the display.
The red In use light on the base will flash.
1. Press to answer the call or, if the handset is on the
base, simply lift it and speak.
If you have subscribed to your network’s Caller Display
service, the caller’s number will be displayed. See page
33 for more information.
Dialling numbers quickly
Numbers can also be dialled using
the directory (page 20), and from
the Calls list (page 33).
BT Diverse X10 – Issue 2 – Edition 02 – 29.10.03 – 5737
Using the phone
15
If you have stored a name for the
calling number in your directory,
then the caller’s name will be
displayed instead of their number.
See page 33 for more information.
Call timer
The duration of your call is shown in
the display during the call and for a
few seconds after you hang-up.
5737 Diverse X10 UG [Iss2-1] 5/3/04 10:34 am Page 15