Olympus E-P2 - Manual (Page 12)

12
EN
Shooting
250 250 250 F5.6 F5.6
38 38
P
L N N
Shutter button
Card
access
lamp
• The shutter sounds and the picture is taken.
• The card access lamp blinks and the camera starts recording the picture.
AF confirmation mark
Aperture value
Shutter speed
1
Select a composition while
viewing the LCD monitor
2
Adjust the focus
3
Release the shutter
Press the shutter
button halfway.
LCD monitor
Press the shutter button all
the way (fully).
Never remove the battery or card while the card access lamp is blinking. Doing so could
destroy stored pictures and prevent storage of pictures you have just taken.
• When the focus is locked, the AF confirmation mark (
(
or
n
) and AF target mark
light up.
( : For a high-speed Imager AF-compatible lens which is a Micro Four Thirds
system lens or Four Thirds system lens
n : Other Four Thirds system lens
• Check the focus on the LCD monitor.
• The shutter speed and aperture value that have been set automatically by the camera
are displayed.
AF target
LCD monitor