Olympus EM10 - Manual (Page 20)

20 EN
Shooting using the view
fi nder
2
2 Lightly press the shutter button down to the fi rst position to focus. (Press
halfway.)
• The AF confi rmation mark (() will be displayed, and a green frame (AF target) will
be displayed in the focus location.
250 F5.6 e e 01:02:03
1023
ISO-A
200
ISO-A
200
28 mm
Press the shutter
button halfway.
AF confi rmation mark Shutter speed
Aperture value
AF target
• The ISO sensitivity, shutter speed and aperture value that have been set
automatically by the camera are displayed.
• If the AF confi rmation mark blinks, the subject is not in focus. (P. 132)
3 Press the shutter button again to take a picture. (Press all the way down.)
• The shutter sounds and the picture is taken.
• The shot image will be displayed on the monitor.
Pressing the shutter button halfway and all the way down
The shutter button has two positions. The act of lightly pressing the shutter button to the
fi rst position and holding it there is called “pressing the shutter button halfway,” that of
pressing it all the way down to the second position “pressing the shutter button all (or the
rest of) the way down.”
Press halfway
Press the rest of
the way down
# Cautions
• You can change the viewfi nder display style. In this manual, [Style 1] is used.
g [Built-in EVF Style] (P. 96)
• If the angle of the monitor has been changed, the viewfi nder will not light up automatically.
• If you press and hold down the u button, a menu is displayed that allows you to change
the settings for automatically lighting up the viewfi nder. g [EVF Auto Switch] (P. 96)