Olympus DS-3500 - Manual (Page 11)

11
1
EN
In
se
rt
in
g t
h
e b
a
tt
e
ry
1
2
3
Inserting the battery
This recorder uses a lithium ion battery specified by
Olympus (LI-42B). Do not use any other type of battery.
1 Lightly press down on the battery cover
release button, then open the battery
cover, as shown in the illustration below.
2 Insert the battery observing the correct
polarity as shown in the illustration,
then close the battery cover.
• Insert the battery by sliding in direction A
while pushing down in direction B .
• The supplied battery is not fully charged. It is
recommended to fully charge it before using the
recorder for the first time or after the battery has
been left unattended for a long time (
☞ P.12).
Battery indicator
The battery indicator on the display will decrease as
the battery loses power.
• When this [ ] indicator appears on the display,
charge the battery as soon as possible. When the
battery is too weak, [
s ] and [ Battery Low ] will
appear on the display and the recorder will shut
down.
Notes
• Turn off the recorder before removing the battery.
Removing the battery while the recorder is still in
use may cause malfunctions, file corruption or file
loss.
• Remove the battery if you are not going to use the
recorder for an extended period of time.
• After removing the battery, it may become
necessary to re-set the time and date if you leave
the battery out of the recorder for more than 15
minutes or if you remove the battery right after
loading it into the recorder.