Olympus E-420 - Manual (Page 78)

8
Pl
ayback
functi
ons
8
78
EN
Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
g“REC VIEW” (P. 95)
1
Press the q button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on the
camera again.
2
Use p to select images you want to view. You can also
turn the dial to switch to U for close-up playback.
Single-frame / Close-up playback
j
INFO button
p
q button
L N N
15 15 15
Press p to change the
close-up position.
Press p to move the display
of the close-up position.
When [g FACE DETECT]
(
gP. 41) is set to [ON], a
frame is displayed around a
detected face. Press
i to
move the frame to another
face.
Press bd to view frame-by-
frame close-ups.
When [g FACE DETECT]
is set to [ON], press
ac
to move to another face in
close-up position.
• Press the
INFO button to
return to close-up
playback.
(Single-frame playback) (Close-up playback)
Press the INFO button a : Displays the frame that is
stored 10 frames back.
c : Displays the frame that is
stored 10 frames ahead.
d : Displays the next frame.
b : Displays the previous frame.
(Close-up position playback)
Press the INFO button
(Close-up frame-by-frame playback)
• To exit the playback mode, press the q
button again.
• Pressing the shutter button halfway
resumes the shooting mode.