Olympus E-420 - Manual (Page 12)

12
EN
Attaching a lens to the camera
Rear cap
Body cap
Lens cap
Lens attachment mark (Red)
Alignment mark (Red)
Lens release button
1
Remove the body cap from the camera
and the rear cap from the lens
2
Attach a lens to the camera
Do not press the lens release button.
3
Remove the lens cap
(3, 4)
Removing the lens from the camera
While pressing the lens release button (1),
rotate the lens in the direction of the arrow (2).
• Align the lens attachment mark (red) on
the camera with the alignment mark (red)
on the lens, then insert the lens into the
camera’s body (1).
• Rotate the lens in the direction indicated
by the arrow until you hear it click (2).