beautypg.com

Selecting the range for measuring the brightness, Selecting the focusing area, Recording sound when shooting still images – Olympus µ TOUGH-8000 User Manual

Page 32: Selecting the focusing area [af mode, Recording sound when shooting still images [ r

background image

EN

Selecting the range for measuring the
brightness [ESP/
n]

B

CAMERA MENU  ESP/n

: K

 A

Submenu 2

Application

ESP

Shoots to obtain a balanced

brightness over the entire screen.

(Meters the brightness at the

center and surrounding areas of

the screen separately.)

n

(spot)

Shoots the subject at the center

during backlighting.

When set to [ESP], the center may

appear dark when shooting against strong

backlighting.

Selecting the focusing area [AF MODE]

B

CAMERA MENU  AF MODE

: K

Submenu 2

Application

FACE DETECT

*1

This is used for taking pictures of

people. (The camera automatically

detects a face and displays a

frame on the monitor). Press the

shutter button halfway, when the

camera focuses on a face the AF

target mark lights green. When the

AF target mark lights orange, this

indicates the camera has focused

on something other than a face.

iESP

This enables you to compose the

shot without worrying about the

focusing position. The camera

finds the subject to focus on and

automatically adjusts the focus.

SPOT

The camera focuses on the

subject within the AF target mark.

*1

For some subjects, the frame may not appear or

may take some time to appear.

Recording sound when shooting still
images [

R]

B

CAMERA MENU  R

: K

Submenu 2

Application

OFF

No sound is recorded.

ON

The camera automatically starts

recording for approx. 4 seconds

after taking the picture. This is

useful for recording notes or

comments about the picture.

When recording, aim the microphone (p. 6)

at the source of the sound you want to

record.

Reducing the blur caused by the
camera shake when shooting
[IMAGE STABILIZER] (still images) /
[DIS MOVIE MODE] (movies)

B

CAMERA MENU  IMAGE STABILIZER /

DIS MOVIE MODE

: K

 b A

Submenu 2

Application

OFF

The image stabilizer is deactivated.

This is recommended for shooting

when the camera is fixed in place

on a tripod or other stable surface.

ON

The image stabilizer is activated.

The camera’s default settings are [IMAGE

STABILIZER] (still images) to [ON] and [DIS

MOVIE MODE] (movies) to [OFF].

While [IMAGE STABILIZER] (still images)

is set to [ON], noises may occur from the

inside of the camera if the shutter button is

pressed.

Images may not be stabilized if camera

shake is too severe.

When the shutter speed is extremely slow,

such as when taking still shots or taking

pictures at night, the stabilizer may not be

as effective.

When shooting while the [DIS MOVIE

MODE] (movies) is set to [ON], the image

will be enlarged somewhat before saving.