Olympus TOUGH-8010 - Manual (Page 26)

26 EN
3 Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
The camera releases the shutter
automatically.
AUTO AUTO
MENU OK SAVE CANCEL
To combine only two pictures, press the
A button before taking a third frame.
4 Repeat Step 3 to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the m button.
If the shutter does not automatically release,
try [MANUAL] or [PC].
Taking pictures with [MANUAL]
1 Use HI to specify at which edge the
next picture is to be connected.
MANUAL MANUAL
1 2 1 2
MENU BACK
Direction for
combining the
next frame
●
●
2 Press the shutter button to take the fi rst
frame.
1st frame
MANUAL MANUAL
1 2 1 2
MANUAL MANUAL
1 2 1 2
MENU BACK MENU OK SAVE CANCEL
Joint areas
3 Compose the next shot so that joint area
1 overlaps joint area 2.
Composition of the 2nd frame
MANUAL MANUAL
1 2 1 2
MENU OK SAVE CANCEL
4 Press the shutter button to take the next
shot.
To combine only two pictures, press the
A button before taking the third frame.
5 Repeat steps 3 and 4 to take a third
frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the m button.
●