Ae lock, El/afl b, Gp. 48 – Olympus E-5 User Manual
Page 48: Exposure compensation

48
EN
2
Ex
pos
u
re
• The exposure compensation indicator is displayed. The exposure compensation indicator
will not be displayed when the exposure is compensated by 0.
• If the exposure compensation value exceeds the scale of the exposure compensation
indicator, the indicator will blink in the viewfinder and on the control panel. A red
vw is
displayed on the left and right edges of the indicator on the super control panel.
To change the exposure adjustment interval:
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. g“EV STEP” (P. 111)
To adjust the exposure using only the dials:
j You can set the exposure compensation value without pressing F button.
g“DIAL FUNCTION” (P. 104)
x
Notes
• Exposure compensation is not available in M and
BULB modes.
• When the exposure compensation value exceeds
±
3, the effect is not displayed correctly on
the live view.
The metered exposure value can be locked with the
AEL/AFL button (AE lock). Use AE lock
when you want a different exposure setting from the one that would normally apply under the
current shooting conditions.
Normally, pressing the shutter button halfway locks both AF (auto focus) and AE (automatic
exposure), but you can lock the exposure alone by pressing the
AEL/AFL button.
Press the
AEL/AFL button at the position where you
wish to lock the metering values and the exposure will
be locked.
• Pressing the
AEL/AFL button again to cancel the AE
lock.
TIPS
AE lock
1/3 EV
1/2 EV
When set to 1/3 EV increments
When set to 1/2 EV increments
AEL/AFL button
Viewfinder
AE lock