Olympus E-5 - Manual (Page 100)

100
EN
8
Setup f
u
nct
ions
FIRMWARE
Your product’s firmware version will be displayed.
When you make inquiries about your camera or accessories or when you want to download
software, you will need to state which version of each of the products you are using.
Setting MYSET
You can register the current camera setting condition as up to 4 MYSETs.
Set the camera to desired condition and then register it.
By registering it, you can select it as one of the shooting mode such as P/S/A/M.
Also, you can assign it to the specified button ([
<]/P/t (Preview)) in [BUTTON
FUNCTION]. g“BUTTON FUNCTION” (P. 106)
Registering MYSET
1) Select between [MYSET1] to [MYSET4] and press the d button.
2) Use ac to select [SET], then press the i button.
• The current settings are registered in the camera. For details on the functions that can
be registered to MYSET, refer to “Functions that can be registered with MYSET
setting” (
gP. 145).
• To cancel the registration, select [RESET].
Using the MYSET as a shooting mode
Select the desired MYSET.
• Assign MYSET1 to MYSET4 to the Fn button ( g“BUTTON FUNCTION” (P. 106)) to
use the short-cut MYSET shooting.
Shoot while holding the Fn button.
x
Notes
• MYSET (My Setting)
RESET/MYSET
Menu MENU [W] [RESET/MYSET]
Direct button MODE + j