Olympus DS-2500 - Manual (Page 43)

Backlight [Backlight]
When the display backlight is set to [On], the
backlight will light up for about 10 seconds when a
button is pressed.
This is useful in that it allows you to check the display
even in dark locations.
1
Select [Backlight] at the [Display Menu]
screen, then press the PLAY/OK or
9
button.
• Refer to P.41 regarding each menu item
settings.
2
Press the + or – button to select [On] or
[Off].
[On]: Backlight is enabled.
[Off]: Backlight is disabled.
3
Press the PLAY/OK button to complete
the setting.
• [Setting fixed] will light up on the display,
and it will return to the [Display Menu]
screen.
• If you press the 0 or F1 (BACK) button the
setting will be cancelled and it will return to
the [Display Menu] screen.
• Pressing the F3 (EXIT) button will cancel the
contents being set and take you out of the
MENU.
4
Press the F3 (EXIT) or
0 button to
close the menu screen.
PLAY/OK
PLAY/OK button
+, − button
9, 0 button
F1, F3 button
3
EN
43
Bac
k
lig
h
t
BACK EXIT
Display Menu
Backlight
12
LED
Contrast
Language
BACK EXIT
Backlight
On
Off
BACK EXIT
Backlight
On
Off
Setting
fixed