Power on – Olympus E-30 User Manual
Page 15

15
EN
Basic guide
Power on
SSWF indicator
Control panel
Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic
vibrations are used to remove dust and dirt from the image pickup device’s filter surface. The SSWF
(Super Sonic Wave Filter) indicator blinks while dust reduction is working.
Adjust the viewfinder’s diopter in accordance with
your vision.
While looking through the viewfinder, rotate the
diopter adjustment dial little by little.
When you can see the AF target clearly,
adjustment is complete.
Adjusting the viewfinder’s diopter
When the camera is turned on,
the battery check is displayed
on the control panel.
Viewfinder
Diopter adjustment dial
AF target
Lit up (ready for use)
Lit up (battery power is low)
Blinks (charging required)
Turns the control panel light on and off.
LIGHT button
• To turn off the power, set the power switch to OFF.
1
Set the camera’s power switch to ON
Power switch
Set the mode dial to
AUTO.
Mode dial
Pr
ep
ar
at
ions
f
o
r sh
oot
in
g
E-30_MASTER.fm Seite 15 Mittwoch, 3. Dezember 2008 1:56 13