beautypg.com

Olympus E-30 User Manual

Page 149

background image

149

EN

In

fo

rm

at

io

n

11

CAUTION

• Before loading, always inspect the battery carefully for leaks, discoloration, warping, or any other abnormality.

• The battery may become hot during prolonged use. To avoid minor burns, do not remove it immediately after

using the camera.

• Always unload the battery from the camera before storing the camera for a long period.

• This camera uses a lithium ion battery specified by Olympus. Do not use any other type of battery. For safe

and proper use, read the battery’s instruction manual carefully before using it.

• If the battery’s terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a dry

cloth before use.

• Always charge a battery when using it for the first time, or if it has not been used for a long period.

• When operating the camera with battery power at low temperatures, try to keep the camera and spare battery

as warm as possible. A battery that has run down at low temperatures may be restored after it is warmed at

room temperature.

• The number of pictures you can take may vary depending on the shooting conditions or battery.

• Before going on a long trip, and especially before traveling abroad, purchase extra batteries.

A recommended battery may be difficult to obtain while traveling.

• Please recycle batteries to help save our planet’s resources. When you throw away dead batteries, be sure to

cover their terminals and always observe local laws and regulations.

• To protect the high-precision technology contained in this product, never leave the camera in the places listed

below, no matter if in use or storage:

• Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight,

beaches, locked cars, or near other heat sources (stove, radiator, etc.) or humidifiers.

• In sandy or dusty environments.

• Near flammable items or explosives.

• In wet places, such as bathrooms or in the rain. When using products with weatherproof designs, read their

manuals as well.

• In places prone to strong vibrations.

• Never drop the camera or subject it to severe shocks or vibrations.

• When mounted on a tripod, adjust the position of the camera with the tripod head. Do not twist the camera.

• Do not leave the camera pointed directly at the sun. This may cause lens or shutter curtain damage, color

failure, ghosting on the image pickup device, or may possibly cause fires.

• Do not touch electric contacts on cameras and interchangeable lenses. Remember to attach the body cap

when removing the lens.

• Before storing the camera for a long period, remove the battery. Select a cool, dry location for storage to

prevent condensation or mold from forming inside the camera. After storage, test the camera by turning it on

and pressing the shutter release button to make sure that it is operating normally.

• Always observe the operating environment restrictions described in the camera’s manual.

• Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode failure

or damage to the monitor.

• A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.

• When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is

not a malfunction; it will be less noticeable in playback mode.

• In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may change

temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm

place. An LCD monitor exhibiting poor performance due to low temperatures will recover in normal

temperatures.

• The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots of

light may appear constantly on the LCD Monitor. Due to its characteristics or the angle at which you are viewing

the monitor, the spot may not be uniform in color and brightness. This is not a malfunction.

• Do not immerse in water or splash with water.

• Do not drop or exert strong force on the lens.

• Do not hold at the moving part of the lens.

• Do not touch the lens surface directly.

• Do not touch the contact points directly.

• Do not subject to abrupt temperature changes.

• The operating temperature range is –10 °C – 40 °C (14 °F – 104 °F). Always use within this temperature range.

Caution for Usage Environment

LCD Monitor

Lens

E-30_MASTER.fm Seite 149 Mittwoch, 3. Dezember 2008 1:56 13