Restoring default settings, Playback help and troubleshooting tips, The red-eye cannot be fixed – Olympus 1030 SW User Manual
Page 56: Bright specks appear in the picture

56
EN
Get
ti
ng t
o
k
now
y
our camera bet
ter
• Some items are not be selectable from the menus when using the arrow pad.
(The menu items displayed in gray cannot be selected.)
• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:
When [DRIVE] is set to [
W], [FINE ZOOM] or [DIGITAL ZOOM] cannot be set.
• Some functions cannot be set by pressing the function buttons depending on the camera
setting.
[
%], Flash Mode, etc.
• Some functions cannot be used when there is no card in the camera.
[PANORAMA], [PRINT ORDER], [FORMAT], [BACKUP]
• You cannot change the function settings when the mode dial is set to
g.
• This camera retains the settings (except for
s) even after the power is turned off. To
return the settings to default settings, execute [RESET].
g “RESET Restoring default settings” (P. 24)
The monitor may be difficult to see and the exposure difficult to confirm when shooting
outdoors.
Press
g/E/Y repeatedly to display the histogram
• Set the exposure so that the graph is concentrated on the outer edges and the graph is
balanced on both sides.
g “g/E/Y button Changing the information on display/Display the menu guide/Turning
on the LED illuminator/Checking the time” (P. 19)
• Depending on the picture, the red-eye may not be fixed. Also, parts except the eye may be
fixed.
• Light reflecting from dust and other particles in the air at night may appear as bright specks
in pictures taken using the flash.
Functions that cannot be selected from menus/Functions that cannot be
selected even by pressing the function buttons
Restoring default settings
Confirming the exposure when the monitor is difficult to see outdoors
How to read the histogram
1 If the peak fills too much of the frame, the image will appear
mostly black.
2 If the peak fills too much of the frame, the image will appear
mostly white.
3 The part indicated in green in the histogram shows the luminance
distribution in the center area of the monitor.
Playback help and troubleshooting tips
The red-eye cannot be fixed
Bright specks appear in the picture
1
2
3
3