Olympus 1030 SW - Manual (Page 18)

But
to
n o
perat
io
ns
18
EN
Press
q in shooting mode to switch to playback mode and display the last picture taken.
Press
q again or press the shutter button halfway to return to shooting mode.
g “q View pictures/Selecting playback mode” (P. 13)
When a printer is connected to the camera, display the picture you want to print in playback
mode and press
<.
g “EASY PRINT” (P. 41)
Press
f in shooting mode to turn on or off Shadow Adjustment Technology. Press o for
setting. A frame is displayed on the monitor around your subject’s face (except for
Y/ n).
This function makes the subject’s face appear brighter, even against strong backlighting, and
adjusts the background to ensure proper exposure of your picture.
• It may take a few seconds until the frame is displayed on the monitor.
• The faces may not be detected depending on the subject.
• When [ON] is selected, the following setting restrictions apply:
• [ESP/n] is fixed at [ESP].
• [AF MODE] is fixed at [FACE DETECT].
• You can also use Shadow Adjustment Technology to compensate for backlighting in shot
still pictures.
g “PERFECT FIX Editing images” (P. 30)
In playback mode, select the picture you want to erase, and press
S.
• Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
g “0 Protecting pictures” (P. 33)
Hold down
f/S in shooting mode to display the guide indicating the location of the buttons.
q/< button
Viewing pictures/Printing pictures
q Viewing pictures immediately
< Printing pictures
f/S button
Brightening the subject against backlight/Erasing pictures/
Displaying the button guide
f Brightening the subject against backlight
OFF Shadow Adjustment Technology is deactivated.
ON Shadow Adjustment Technology is activated.
S Erasing pictures
Displaying the button guide
b
c