Olympus VH-410 - Manual (Page 35)

35 EN
Saving battery power between shots Saving battery power between shots
dd [Power Save] [Power Save]
Submenu 2 Application
Off Cancels [Power Save].
On
When the camera is not being used
for approx. 10 seconds, the monitor
automatically turns off to save
battery power.
To resume standby mode To resume standby mode
Press any button.
Changing the display language Changing the display language dd [ [l l]]
Submenu 2 Application
Languages
The language for the menus and
error messages displayed on the
monitor is selected.
Setting the date and time Setting the date and time dd [ [ X X]]
1 Press the Arrow pad to FG to select the year for [Y].
2 Press the Arrow pad to I to save the setting for [Y].
3 As in Steps 1 and 2, press the Arrow pad to
FGHI to set [M] (month), [D] (day), [Time] (hours
and minutes), and [Y/M/D] (date order), and then press
the
A button.
For precise time setting, press the A button as the
time signal strikes 00 seconds.
Choosing home and alternate time Choosing home and alternate time
zones
zones dd [World Time] [World Time]
You will not be able to select a time zone using
[World Time] if the camera clock has not fi rst been set
using [
X].
Submenu 2 Submenu 3 Application
Home/
Alternate
x
The time in the home time
zone (the time zone selected
for x in submenu 2).
z
The time in the travel
destination time zone (the
time zone selected for
z in
submenu 2).
x *1 —
Select the home time zone
(x).
z *1, 2 —
Select the travel destination
time zone (
z).
*1 In areas where daylight saving time is in effect, use
FG to turn daylight saving time ([Summer]) on.
*2 When you select a time zone, the camera automatically
calculates the time difference between the selected
zone and the home time zone (x) to display the time in
the travel destination time zone (
z).