Olympus VH-410 - Manual (Page 30)

30 EN
Rotating images Rotating images q q [ [y y]]
Submenu 1 Submenu 2
Edit y
1 Use HI to select an image.
2 Press the A button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to make settings
for other images, and press the
 button.
The new picture orientations will be saved even after
the power is turned off.
Erasing images Erasing images q q [Erase] [Erase]
Submenu 2 Application
All Erase
All images in the internal memory or
card will be erased.
Sel. Image
Images are individually selected and
erased.
Erase Deletes the image displayed.
When erasing pictures in the internal memory, do not
insert the card into the camera.
Protected images cannot be erased.
To individually select and erase images To individually select and erase images
[Sel. Image]
[Sel. Image]
1 Use FG to select [Sel. Image], and press the
A button.
2 Use FGHI to select the image to be erased, and
press the A button to add a R mark to the image.
● Press to the T end to return to the single frame
display.
Sel. Image
Erase/Cancel
OK
MENU
(1)
4/30
R mark
3 Repeat Step 2 to select the images to be erased,
and then press the
 button to erase the selected
images.
4 Use FG to select [Yes], and press the A button.
● The images with a R mark are erased.
To erase all images [All Erase] To erase all images [All Erase]
1 Use FG to select [All Erase], and press the
A button.
2 Use FG to select [Yes], and press the A button.
Saving print settings to the image data Saving print settings to the image data
q q [Print Order] [Print Order]
“Print Reservations” (p. 43)
Print reservation can be set only for still images that
are recorded to the card.