Olympus SP-570 UZ - Manual (Page 56)

56
EN
Menu ope
rati
ons
Operating, shutting off and checking the alarm
• Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
• Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off the camera.
After 1 minute of no operation, the alarm stops automatically and the camera turns off when
[SNOOZE] is set to [OFF].
• Checking the alarm settings:
While the camera is off, press
DISP./E to display the set alarm time and the current time for 3
seconds.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV’s video signal type.
•
TV video signal types differ by country/region. Check the video signal type before connecting the
camera to the TV.
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Press
DISP./E in shooting mode to determine the type of frame assist to be displayed.
When [OFF] is selected, pressing
DISP./E will not display the frame assist.
VIDEO OUT ........................................................................ Playing back pictures on a TV
NTSC / PAL
NTSC : North America, Taiwan, Korea, Japan
PAL : European countries, China
FRAME ASSIST .................... Displaying the frame assist/Determining the type of frame assist
OFF /
w
/ x
Connect to the TV’s video input (yellow) and
audio input (white) terminals.
AV cable (provided)
Connector cover
Settings on the camera
Turn the camera on in playback mode.
•
The last picture taken is displayed on the
TV. Use the arrow pad to select the picture
you want to display.
Settings on the TV
Turn the TV on, and set it to video input mode.
•
For details of switching to video input, refer to
your TV’s instruction manual.
• Images and the information displayed on the
screen may become cropped depending on the
TV’s settings.
Multi-connector