Olympus SP-570 UZ - Manual (Page 53)

EN
53
Me
nu opera
tions
You can make the following settings with [SOUND SETTINGS].
•
Setting the type of button operation sounds and volume. (BEEP)
• Selecting the sound and volume of the shutter button. (SHUTTER SOUND)
• Adjusting the volume of the camera warning sound. (
8)
• Adjusting the volume during playback. (
q VOLUME)
• You can set all the sounds muted at once by setting [SILENT MODE].
g “SILENT MODE Setting to turn off operational sounds” (P. 45)
Perform next operation to set whether to display on the monitor or viewfinder.
•
When
m is pressed
• When
f/S is pressed in the playback mode
• When
q/ P is pressed in the shooting mode
g “ o button (OK/FUNC) Setting using the control panel or function menu” (P.28)
“Operations using the control panel” (P.29)
SOUND SETTINGS .......................................... Setting the sounds output from the camera
BEEP SOUND TYPE 1 / 2
VOLUME OFF (No sound) / LOW / HIGH
SHUTTER SOUND SOUND TYPE 1 / 2 / 3
VOLUME OFF (No sound) / LOW / HIGH
8
OFF (No sound) / LOW / HIGH
q VOLUME
• Press
1 2 on the arrow pad to adjust the
volume.
• You can select [OFF] or adjust in 5 steps from
1 to 5.
REC VIEW ........................................................................... Viewing pictures immediately
OFF The picture being recorded is not displayed. This is useful when you
want to prepare for your next shot while the previous picture is being
recorded.
ON The picture being recorded is displayed. This is useful when you want
to quickly review the last picture taken. You can resume shooting while
the picture is still being displayed.
• Select [ON] to set whether to display the image on the monitor or
viewfinder during recording.
LCD ONLY Pictures that are being recorded will always be
displayed on the monitor.
CURRENT Pictures that are being recorded will be displayed on
the viewfinder when the viewfinder is used and on the
monitor when the monitor is used.
MENU DISPLAY ................................................... Displaying menu display on the monitor
LCD ONLY This always displays the menu on the monitor.
CURRENT This displays the menu on the viewfinder when the viewfinder is used
and on the monitor when the monitor is used.
CONTROL PANEL .......................... Switching between the control panel and function menu
OFF The function menu is displayed on the monitor or in the viewfinder.
ON The control panel is displayed on the monitor.