Olympus EVOLT E-300 - Manual (Page 209)

209
12
Inf
ormation
12E-300EN-P191 04.10.22 11:40 AM Page 209
A
GGLWLRQDO functions DYDLODEOHDIWHUILUPZDUHXSGDWe
● SHADING COMP.
In some cases, the edges of the image may be shadowed due to the properties of the
lens. The SHADING compensation function compensates by increasing brightness at
the dark edge of the image. Especially when a wide-angle lens is used, this function is
able to work effectively.
To enable the function, in the Camera 2 menu, select CHADING COMP., select ON,
and then press the OK button.
NOTES:
-- This function is not available when a teleconverter or inner tube extension is attached
to the camera.
-- At higher ISO settings, noise at image edges may be conspicuous.
-- The function is not avaialble when the record mode is set to RAW or RAW+JPEG.
● ANTI-SHOCK
This dimishes camera shake caused by vibrations when the mirror moves. You can
select the interval from the time the mirror is raised until the shutter is released.
To use this function, in the Camera 2 menu, select ANTI-SHOCK and then OFF.
Next, press the up or down arrow button to select the interval (from 1 to 30 seconds).
Finally, press the OK button. )XQ
)XQFWLRQVDYDLODEOHLQ(92/7(ILUPZDUHYHUVLRQ
waiting until focusing and flash charge are finished. This function is useful when you
● RELASE PRIORITY S
In the S-AF mode, you can release the shutter button and take a picture without
waiting until focusing and flash charge are finished. This function is useful when
you need to take advantage of a shutter-release opportunity.
To use this function, in the Setup 1 menu, select RELEASE PRIORITY S, then
ON and then press the OK button.
● RELEASE PRIORITY C
In the C-AF mode, you can release the shutter button and take a picture without
need to take advantage of a shutter-release opportunity. When RELEASE
PRIORITY C is set to ON, PREDICTIVE AF is not available.
To use this function, in the Setup 1 menu, select RELEASE PRIORITY C > ON,
and then press the OK button.