Olympus DS-4000 - Manual (Page 38)

38
3
In order to place an index mark in a file, the index function must be programmed to the A or B
button on the recorder.
Index marks can be placed in a file during recording or playback to provide a quick and easy to
identify important sections in the file.
Setting an Index Mark
1 Press the INDEX (A or B) button
during recording or playback to set
an index mark.
An index number appears on the display.
Locating an Index Mark
2 Hold the FF or REW button while
playing a file.
The recorder stops for 1 second when it
reaches the index mark.
Clearing an Index Mark
3 Locate the index mark you want to
clear.
4 Press the ERASE button while the index
number appears for approximately 2
seconds on the display.
The index mark is erased.
.................................................................................................................
Notes
• Up to 16 index marks can be set in a file. Attempting to set more index
marks will cause “INDEX FULL” to appear on the display.
• Index marks cannot be set or cleared in a locked file (
☞ P.37).
Index Marks
AUTHOR A
12M05S
I NDEX 08
SET
AUTHOR A
12M05S
I NDEX 08
CLEAR
Index Marks
4
2
1