Olympus DS-4000 - Manual (Page 28)

28
2
Hands-free Recording
Hands-free Recording/
Recording Monitor
The recorder can be used as a hands-free recording device. To setup the recorder for hands-
free operation, connect the optional Olympus foot switch (RS25/26) to the back of the cradle
and place the recorder in the cradle as shown in the diagram below.
The default settings of the foot switch
functions are as follow:
Notes
• The Olympus foot switch (RS25/26) is sold
separately.
• Move the slide switch of the recorder to the STOP
position before connecting it to the cradle for
hands-free recording.
It is possible to monitor your recording by listening to the
recording while recording is in progress. Insert the earphone
plug into the earphone jack and use the VOLUME button
to control the volume level.
Recording Monitor
Default settings
VOLUME
(+) / (–)
button
Switch
Left SW
Center SW
Right SW
Press
–
–
NEW
Press and hold
REV
REC
–
Release
PLAY
STOP
–
Note
Insert the plugs to the end as shown in the illustration when
inserting the earphone or external microphone.