Olympus PT-EP08 - Manual (Page 48)

EN 23
EN
8. Appendix
Specifications
„ Underwater Case PT-EP08
* We reserve the right to change the external appearance and the specifications without notice.
Supplied accessories for PT-EP08
O-ring: POL-EP01 Silicone grease: PSOLG-2
Silica gel: SILCA-5S Monitor hood: PFUD-EP08
Body cap: PBC-EP08
Optional accessories
Silicone grease: PSOLG-3 Underwater optical fiber cable: PTCB-E02
Bracket: PTBK-E01/PTBK-E02 Short arm: PTSA-02/PTSA-03
Underwater flash: UFL-2/UFL-1 Macro lens adapter: PMLA-EP01
Macro lens for underwater cases: PTMC-01 Zoom gear: PPZR-EP01/PPZR-EP02
Antireflective ring : POSR-EP01/POSR-EP02/POSR-EP03/POSR-EP05
Underwater extension adapter: PAD-EP08
* When use combining PTBK-E01 and the Case, the dedicated washers are necessary in the screw part.
If you have PTBK-E01 to which dedicated washers are not bundled, please contact to customer support
center.
„ Waterproof lens port PPO-EP01 (optional)
* We reserve the right to change the external appearance and the specifications without notice.
Supplied accessories for PPO-EP01 (optional)
O-ring: POL-E301 Silicone grease: PSOLG-2
Rear port cap: PRPC-EP01 Front (Body) cap: PBC-EP01
Accessories can be purchased. Products of other model types than those describing above cannot be used.
Available models Olympus Digital Camera E-M5
Pressure resistance Depth of down to 45 m (147 feet)
Main materials Main body: Polycarbonate
O-rings: Silicone rubber
Dimensions Width 201 mm x Height 163 mm x Depth 114 mm
Weight 1,030 g (not including lens port, camera and accessories)
Weight under water Approx. –15 g (including camera, lens (14-42mm llR), zoom gear,
antireflective ring, battery and media card) (in the freshwater)
Available Cases PT-EP08
Pressure resistance Depth of down to 45 m (147 feet)
Main materials Main body: Polycarbonate
O-ring: Silicone rubber
Dimensions Maximum diameter 120 mm× Depth 89 mm
Weight Approx. 440 g (not including accessories)
PT-EP08_EN.Book Page 23 Friday, June 29, 2012 11:02 AM