Olympus PT-EP08 User Manual
Page 29
EN 4
EN
Installation and removal of the monitor hood ................................................................... 8
Mounting and removal of the body cap............................................................................ 8
Installation and removal of the lens port (PPO-EP01: optional)....................................... 9
Check the digital camera...................................................................................................... 11
Open the Case ..................................................................................................................... 12
Install the flash to the camera .............................................................................................. 12
Load the digital camera ........................................................................................................ 13
Make sure the camera is loaded properly ............................................................................ 13
Seal the Case....................................................................................................................... 14
Check the operation of the loaded camera .......................................................................... 14
Water Leakage Test ............................................................................................................. 15
Wipe off any waterdrops ...................................................................................................... 18
Unload the digital camera .................................................................................................... 18
Wash the Case with pure water ........................................................................................... 18
Dry the Case ........................................................................................................................ 19
Remove the O-ring ............................................................................................................... 20
Remove any sand, dirt, etc. ................................................................................................. 20
Install the O-ring ................................................................................................................... 20
How to Apply Grease to the O-ring ...................................................................................... 21
Replace consumable products ............................................................................................. 22
Contents
PT-EP08_EN.Book Page 4 Friday, June 29, 2012 11:02 AM