Olympus PT-EP08 - Manual (Page 36)

EN 11
EN
3. Installing the digital camera
Check the digital camera
Check the digital camera before loading it in the Case.
1. Battery Confirmation
It is impossible to change the batteries when using the Case. Make sure that you have sufficient
remaining battery capacity before use.
2. Check the remaining number of pictures
Check that the image storage medium has enough room for the number of pictures you want to take.
3. Remove the strap, lens cap and filter from the camera.
If the digital camera is loaded without removing the strap and lens cap, the Case cannot be sealed
properly and may leak.
4. Attach the zoom gear (optional) and the antireflective ring (optional).
Example of 14-42mm IIR lens
For details, refer to the instruction manual of the zoom gear and the antireflective ring.
* If the version of the camera body is 1.2 or later, M.ZUIKO DIGITAL ED 12-50mm can be used without
using the zoom gear and anti-reflection ring. When using this lens, set the zoom ring position to “E-
ZOOM”.
When the underwater mode is selected (P.17), the zoom position is fixed.
Underwater Wide-Angle: Maximum wide angle state /
Underwater Macro: Maximum telephoto state
5. Turn off the EVF.
Zoom gear Antireflective ring
M.ZUIKO DIGITAL ED 14-42mm PPZR-EP01 POSR-EP01
M.ZUIKO DIGITAL ED 14-42mm II/IIR PPZR-EP02 POSR-EP03
M.ZUIKO DIGITAL ED 9-18mm PPZR-EP02 POSR-EP02
M.ZUIKO DIGITAL 45mm – POSR-EP03/POSR-EP05
Antireflective ring
PT-EP08_EN.Book Page 11 Friday, June 29, 2012 11:02 AM