Beko 40WLU530HID - Manual (Page 20)

18
7
MENU
SOUND
VOLUME
BALANCE
SOUND TYPE
SOUND MODE
AVL
EQUALIZER
HEADPHONE
SRS
STEREO
NORMAL
OFF
CHANGE BACK
Settings of Your New Television
7.1- Sound Menu Settings
You may perform volume settings
by using the VOL+ or VOL-
buttons on your television or the
VOL+/VOL- buttons on your
remote control. You can perform
other Sound settings by entering
the Sound menu. For this, press
the MENU button on your remote
control. Select SOUND by pressing
the Up/Down movement buttons from the
main menu and press the OK button. The
Sound menu is displayed.
You can select the tab which you
want to process with the Down
movement button and set its level
with Left/Right movement buttons.
sound of the program. Options in the SRS
menu become active when the SRS function
is selected.
Note: SRS menu will not be active if the
SRS is not selected from the Sound mode
tab.
7.1.4-AVL (Automatic Volume
Limiting)
Television transmitters have different sound
levels. This can be noticed as high and low
volume levels in different channels while
switching from one program to another.
Using the Left/Right movement buttons,
select ON. The AVL (Automatic Volume
Limiting) function maintains the same
sound level as you switch from program to
program. Select OFF to cancel it.
7.1.5-Headphones
By connecting headphones to your television
you can listen to the program sounds
independently from your television. To
turn up and down the headphone volume
level, select HEADPHONE tab from the
Sound menu and adjust the volume level by
using the Left/Right movement buttons.
When you want to hear the sound from
the headphone only, just press the MUTE
button on your remote control.
7.1.6-SRS TruSurround Sound
This is the virtual sound technology. With
TruSurround, 6 different channels of the
digital sound are processed in two channels
and conveyed to the audience through two
speakers. TruSurround system is used to
create a virtual surround sound effect in
environments where there is no 4.1 or 5.1
speaker systems exist.
7.1.1-Balance
To adjust the sound balance between the
right and left loudspeakers to the desired
level, select the BALANCE tab in the sound
menu by using the Down movement button.
Using the Left/Right movement buttons
adjust this option to the desired level.
7.1.2-Sound type
The program you watch may be broadcast
in stereo or in two different languages. Using
the Right/Left movement buttons in this
menu, you can select Mono/Stereo or Dual-
I/Dual-II languages.
7.1.3-Sound Mode
Sound mode can be set as NORMAL,
SPATIAL or SRS by means of direction
buttons. Spatial option gives depth to the
TruSurround is a registered
trademark of the SRS Labs. Inc.
TruSurround XT technology is covered
under the license of SRS Labs. Inc.