Beko 40WLU530HID - Manual (Page 14)

12
6.3.2-Manual tuning of channels and
storing in the memory
In digital mode: Press MENU
button, MAIN MENU will be
displayed. Select SETUP tab with
Down movement button and
confirm with the OK button. SETUP
menu will be displayed. Select
MANUAL TUNING tab and confirm
by pressing the OK button. Manual Search
Parameters menu will be displayed.
Manual Search Parameters
Channel
Frequency
Update of Channel List
21
474000
Add channels
Change Start Back
Highlight the Channel tab by
means of Up/Down buttons and
directly enter the frequency number
of the channel you want to search,
if you know, by using the numeric
keys on the remote control. If you
don’t know the frequency number,
you can scan frequencies by using
the Left/Right movement buttons.
After entering the frequency you
want to search, highlight Update of
Channel List tab with Up/Down movement
buttons and select either one of Add
channels, Replace channels or Erase
channel list items, then press OK button to
start searching. Channels will be searched
or changed according to the search method
you have chosen.
Channel Search
Waiting for signal...
Service found:
TV: 0 Radio: 0 Other: 0
Stop Search
Add Channels : With this option, the new
channels in the frequency which is desired to
be manually searched will be scanned and
added to the existing channel list.
Replace Channels : With this option, you
can update the existing channel list with the
modifications made by the broadcaster.
Erase Channel List : With this option,
you can delete all channels in the existing
channel list to store only the new channels in
the desired frequency into the memory.
Note: You can also access the Manual
Tuning menu from the Service Menu
submenu under Digital Features menu.
6.3.3-Program Table
With the program table, you can see the
stored channels in a list and create 6
favorite channels lists as you desire.
Select the PROGRAM TABLE item
from the main menu by means of
Up/Down movement buttons to
access program table and press
OK button to confirm. Program
Table will be displayed. You can
also access the program table menu directly
by pressing the OK button on your remote
control when there is not any open menu on
the screen.
All TV
1 Channel
2 Channel
3
4
5
Select
Edit List
Back
Change List