Olympus PT-014 - Manual (Page 19)

E-18
Insertion of silica gel
Before sealing the Case, insert the accessory silica gel bag for prevention
of fogging between the bottom of the camera and the Case. Insert the bag
with the glued longer side to the inside.
：・Insert the silica gel all the way at the specified location and
with the specified orientation. When the orientation is not
correct, the silica gel bag will be caught when the Case is
sealed and water leakage will be caused.
・When it is tried to seal the Case with the bag inserted only part of
the way, the silica gel bag will be caught by the O-ring and
water leakage will be caused.
・ Once silica gel has been used, the moisture absorption
performance will be impaired. Always exchange the silica
gel when the Case is opened and closed.
CAUTION
Pay attention to the orientation.