Olympus VR-370 - Manual (Page 52)

52 EN
Date and time function Date and time function
“Date and time settings return to the default
setting”.
● If the batteries are removed and left out of the
camera for about 1 days *1 , the date and time
settings return to the default setting, and must
be reset.
*1 The time until the date and time settings
return to the default setting varies depending
on how long the batteries have been loaded.
“Turning on the camera and making the initial
settings” (p. 7)
Miscellaneous Miscellaneous
“The camera makes a noise when taking
pictures”.
● The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to
shoot.
Error message
● When one of the messages below is displayed on
the monitor, check the corrective action.
Error message Corrective action
Card Error
Card problem
Insert a new card.
Write Protect
Card problem
The card write-protect switch is
set to the “LOCK” side. Release
the switch.
Memory Full
Internal memory problem
• Insert a card.
• Erase unwanted images.
*1
Card Full
Card problem
• Replace the card.
• Erase unwanted images.
*1
Card Setup
Format
Power Off
Card problem
Use
FG to select [Format],
and press the A button. Next,
use FG to select [Yes], and
press the A button. *2
Memory Setup
Memory Format
Power Off Power Off
Internal memory problem
Use
FG to select [Memory
Format], and press the
A button. Next, use FG to
select [Yes], and press the
A
button. *2
*1 Before erasing important images, download them
to a computer.
*2 All data will be erased.