Menu setting method – Olympus WS-802 User Manual
Page 62
62
5
EN
Menu setting method
Menu setting method
•
In [ Folder ] mode, when the recorder
comes to the end of the last file in the
folder, [ End ] flashes for two seconds on
the display and the recorder stops at the
start of the first file in the folder.
•
In [ All ] mode, after playing the last file
in the current folder, the recorder starts
playing from the first file in the next
folder. When it comes to the end of the
last file in the recorder, [ End ] flashes
for two seconds on the display and the
recorder stops at the start of the first file
in the recorder.
Equalizer
When listening to music, you can set your
favorite sound quality by adjusting the
equalizer setting.
1
Select the desired equalizer
characteristics.
[ Off ]: Disables the equalizer function.
[ Rock ] [ Pop ] [ Jazz ]: Enables the
equalizer function.
[ User ]: Select [ User ] to save your own
custom equalizer settings. If [ User ] is
selected, proceed to Step 2.
2
Select the frequency band.
[ 60 Hz ] [ 250 Hz ] [ 1 kHz ] [ 4 kHz ] [ 12 kHz ]:
Select the frequency bandwidth
setting.
3
Select the equalizer level.
• You can select the equalizer level from
[ –6 ] to [ +6 ] in 1dB increments.
• The higher the decibel value, the louder
the sound.
• To change the settings again, press the
9 or 0 button and repeat the
procedure from step 2.
•
[ Equalizer ] only works in [ Music ] mode.
Play Mode
You can select the playback mode that best
suits the type of audio.
4 When the recorder is in
[ Recorder ] mode:
1
Select [ File ] or [ Folder ].
[ File ]:
Stop after playing back the current
file.
[ Folder ]:
Continuously play files in the current
folder until the last file and then stop.
4 When the recorder is in [ Music ]
mode:
Select the desired playback range:
1
Select [ Playback range ].
2
Select [ File ], [ Folder ] or [ All ].
[ File ]:
Selects the current file.
[ Folder ]:
Selects the current folder.
[ All ]:
Selects all files currently in memory.
Select the desired playback mode:
1
Select [ Repeat ] or [ Random ].
[ Repeat ]:
Sets to repeat playback mode.
[ Random ]:
Sets to random playback mode.
2
Select [ On ] or [ Off ].
[ On ]: Sets the playback range to be
played back repeatedly or randomly.
[ Off ]: Disables the playback mode
function.
•
In [ File ] mode, when the recorder comes
to the end of the last file in the folder,
[ End ] flashes for two seconds on the
display and the recorder stops at the start
of the last file.