Olympus WS-802 - Manual (Page 24)

24
1
EN
In
se
rt
in
g a
n
d e
je
ct
in
g
a m
ic
ro
SD c
a
rd
Inserting and ejecting a microSD card
Notes
• It is possible to switch the recording
media over to the internal memory
(
☞ P.65).
• In some cases microSD cards that have
been formatted (initialized) by another
device, such as a computer, may not be
recognized. Be sure to format microSD
cards with this recorder before using
them (
☞ P.74).
Ejecting a microSD card
1 While the recorder is in stop
mode, open the card cover.
2 Push the microSD card inward to
unlock it, and let it eject partially.
• The microSD card is visibly out of the
slot and can be removed safely.
• If you eject the microSD card when
[ Memory Select ] is set to
[ microSD card ], [ Memory Select ]
will automatically change to
[ Internal memory selected ].
3 Close the card cover securely.
Notes
• Quickly moving your finger away after
pushing the microSD card inward may
cause it to eject forcefully out of the slot.
• Some microSD cards or microSDHC
cards may not be recognized correctly
depending on the manufacturer or type
of card due to compatibility issues with
this recorder.
• See the Olympus website for a list
of microSD cards that have been
confirmed to operate with this recorder
in conditions prescribed by Olympus.
The website http://olympus-imaging.
jp/ introduces manufacturers and
types of microSD cards confirmed to be
compatible. Please note, however, this
is not meant to guarantee that microSD
cards will operate. Some microSD cards
may not be recognized correctly due
to circumstances such as changes in
manufacturer specifications.
• If a microSD card is not recognized,
remove the microSD card and then insert
it again to see if the recorder recognizes
the microSD card.
• Always read the instructions that come
with your microSD card before using.
• Processing speed may be slower with
some types of microSD cards. Processing
performance may also be reduced due
to repeated writing and deleting. If that
happens, reformat the microSD card
(
☞ P.74).