Olympus WS-802 - Manual (Page 22)

22
1
EN
Se
tt
in
g t
h
e t
im
e a
n
d d
a
te
Setting the time and date [Time & Date]
Changing the time and date
5 Press the
` OK button.
• [ Time & Date ] appears on the display.
• “ Hour ” flashes on the display,
indicating the start of the Time and
Date setup process.
3 Press the
` OK button to move
the cursor to the item you want
to set.
• [ Device Menu ] appears on the
display.
4 Press the + or − button to select
[ Time & Date ].
1 While the recorder is in stop
mode, press the MENU button.
• The menu will appear on the display
(
☞ P.53).
2 Press the + or − button to select
[ Device Menu ] tab.
• You can change the menu display by
moving the settings tab cursor.
While the recorder is in stop mode,
press and hold the STOP (
4 ) button to
display [ Time & date ] and [ Remain ].
If the current time and date are not
correct, set them using the procedure
below.
The following steps are the same as
Step 1 through Step 3 of “ Setting the
time and date [ Time & Date ] ” (
☞ P.21).
6 Press the STOP (
4 ) button to
close the menu screen.
+ − button
9 0 button
` OK button
STOP (
4 ) button
MENU button