Olympus VR-350 - Manual (Page 47)

47 EN
Selecting a video signal system to match your TV [NTSC/PAL] Selecting a video signal system to match your TV [NTSC/PAL]
(VR-350/D-755, VR-340/D-750)
(VR-350/D-755, VR-340/D-750)
d (Settings Menu 2)  NTSC/PAL
Submenu 2 Application
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.
PAL Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV To play back camera images on a TV
1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).
2 Connect the TV and camera.
Connect to the TV video input
jack (yellow) and audio input jack
(white).
AV cable
(supplied)
Multi-connector
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
4 Press the q button, and use HI to select the image for playback.
The TV video signal system varies depending on the countries and regions. Before viewing camera images on your
TV, select the video output according to your TV’s video signal type.
For details on changing the input source of the TV, refer to the TV’s instruction manual.
Depending on the TV’s settings, the displayed images and information may become cropped.