Olympus VR-350 - Manual (Page 35)

35 EN
Reducing the blur caused by thecamera Reducing the blur caused by thecamera
shake when shooting
shake when shooting
[Image Stabilizer] (still images)/
[Image Stabilizer] (still images)/
[IS Movie Mode] (movies)
[IS Movie Mode] (movies)
K (Camera Menu 1)  Image Stabilizer
(still images)/
A (Movie menu)  IS Movie Mode (movies)
Submenu 2 Application
Off
The image stabilizer is deactivated.
This is recommended for shooting
when the camera is fi xed in place on
a tripod or other stable surface.
On The image stabilizer is activated.
The camera’s default settings are [Image Stabilizer]
(still images) to [On] and [IS Movie Mode] (movies) to
[Off].
There may be a noise coming from inside the camera
when the shutter button is pressed with [Image
Stabilizer] (still images) set to [On].
Images may not be stabilized if camera shake is too
severe.
When the shutter speed is extremely slow, such as
when taking pictures at night, [Image Stabilizer] (still
images) may not be as effective.
When shooting while the [IS Movie Mode] (movies)
is set to [On], the image will be enlarged somewhat
before saving.
Selecting the focusing area [AF Mode] Selecting the focusing area [AF Mode]
K (Camera Menu 1)  AF Mode
Submenu 2 Application
Face/iESP
The camera focuses automatically.
(If a face is detected, it is shown by
a white frame
*1 ; when the shutter
button is pressed halfway and the
camera is able to focus, the frame
color is changed to green
*2 if the
camera is able to focus. If no face
is detected, the camera chooses a
subject in the frame and focuses
automatically.)
Spot
The camera focuses on the subject
located within the AF target mark.
AF Tracking
The camera tracks the subject
movement automatically to focus on
it continuously.
*1 For some subjects, the frame may not appear or may
take some time to appear.
*2 If the frame blinks in red, the camera is unable to focus.
Try again to press the shutter button halfway.
To focus on a moving subject To focus on a moving subject
continuously (AF Tracking)
continuously (AF Tracking)
1 Hold the camera to align the AF target mark on the
subject and press the Q button.
2 When the camera recognizes the subject, the AF
target mark automatically tracks the subject movement
to focus on it continuously.
3 To cancel the tracking, press the Q button.
Depending on the subjects or the shooting conditions,
the camera may be unable to lock the focus or fail to
track the subject movement.
When the camera fails to track the subject movement,
the AF target mark changes to red.