Brother CS-8060 - Manual (Page 46)

GETTING READY ————————————————————————————————————————————————————————
40
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Sewing Cylindrical Pieces
Free-arm sewing makes sewing cylindrical pieces easy.
Free-arm sewing
Removing the flap allows for free-arm sewing,
making it easier to sew cylindrical pieces such as
sleeve cuffs and pant legs.
1
Slide the flap off to the left.
X With the flap removed, free-arm sewing is
possible.
2
Pull the sliding leg (at the bottom of the
machine) out toward you.
1 Sliding leg
• During free-arm sewing, be sure to pull out
the sliding leg.
3
Slide the part that you wish to sew onto the
arm, and then sew from the top.
4
When you are finished with free-arm sewing,
push the sliding leg back into position.
5
Then, install the flap back to its original
position.
1
S2_brotherE.book Page 40 Wednesday, May 14, 2003 8:05 PM