2 electrical connection, 3 ventilation requirements, Noises – AEG A93100GNW0 User Manual

Page 29

Some functional problems

might occur for some types of

models when operating

outside of that range. The

correct operation can only be

guaranteed within the

specified temperature range.

If you have any doubts

regarding where to install the

appliance, please turn to the

vendor, to our customer

service or to the nearest

Service Centre

The appliance shall have the

plug accessible after

installation.

9.2 Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your

domestic power supply.

• The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

current regulations, consulting a

qualified electrician.

• The manufacturer declines all

responsibility if the above safety

precautions are not observed.

• This appliance complies with the

E.E.C. Directives.

9.3 Ventilation requirements

The airflow behind the appliance must

be sufficient.
1. Put the freezer in horizontal position

on a firm surface. The cabinet must

be on all four feet.

2. Make sure that the clearance

between the appliance and rear wall

is 5 cm.

3. Make sure that the clearance

between the appliance and the sides

is 5 cm.

10. NOISES

There are some sounds during normal running (compressor, refrigerant circulation).

BRRR

HISSS!

SSSR

ENGLISH